Two-step filtration solution for soil remediation

Many former industrial sites still show traces of dumped chemicals and other unusable fractions of the past when companies often dealt with their waste streams in a less responsible manner. Companies that specialise in remediation often combine forces with DESOTEC to ensure remediation projects have every chance of success.

The Problem

At a site in Germany where chemical and pharmaceutical companies were active between 1950 and 1980, a company charged with the remediation of this zone found a mix of numerous contaminants. The company found all types of fluids and other chemicals at the dump site. It was commissioned to categorise all waste streams and to safely transport the hazardous substances to a regeneration plant.

This client, who had already worked with DESOTEC on several occasions, once again called on our services for this project. To prevent the chemical waste from the dump site entering the surrounding area, the contractor installed a large tent over the entire domain. The aim was to completely filter out all substances that could pose a danger to the ambient air.

The Solution

We decided to install two AIRCON H filters in series. Prior to this two-step purification method, the contractor also installed a particulate filter. This ensures that only completely volatile substances end up in the filter system. The first filter removes all contaminants while the second filter acts as a back-up and is installed to guarantee optimum safety.

DESOTEC decided to use activated carbon R-PURE for this project, which is perfectly capable of eliminating all environmentally polluting compounds from the air streams. Once saturated, we transport the mobile filter to the main site in Roeselare (Belgium), where the saturated carbon can again be deployed for similar projects after treatment in the reactivation furnace.

The Results

The two-step filter system was commissioned approximately a year ago and is still operating optimally for the long-term remediation project.

At DESOTEC’s facilities, all used carbon is analysed so the right measures can be taken for handling and removing the saturated carbon out of the mobile filters. All molecules that were adsorbed on the activated carbon at the customers’ site, are desorbed inside DESOTEC’s reactivation furnaces. These contaminants are then fully destroyed, in accordance with National and European legislation, by an incineration and neutralisation setup. The entire installation and it's emissions are under continuous on-line monitoring, which guarantees that only harmless water vapour is seen exiting the chimney.